90deg E&W button
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
90deg E&W button
would it be possible when using polar align to have a E or W button when you get to the stage where you have to move mount 90 degrees just so things are more automated .
Re: 90deg E&W button
Hi
Not sure what you are using to control the mount but if you are using EQMOD just create a second park position which is what I have done. So I start Polar align then when it asks to move the mount I just tell EQMOD to park to the second position which in my case I have called polar align.
Cheers
Nick
Not sure what you are using to control the mount but if you are using EQMOD just create a second park position which is what I have done. So I start Polar align then when it asks to move the mount I just tell EQMOD to park to the second position which in my case I have called polar align.
Cheers
Nick
- admin
- Site Admin
- Posts: 13306
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: 90deg E&W button
Hi,
I'd suggest just using the East and West buttons in the normal mount control area (in the controls on the right-hand side), since they will be there anyway if you have connected SharpCap to your mount.
Cheers, Robin
I'd suggest just using the East and West buttons in the normal mount control area (in the controls on the right-hand side), since they will be there anyway if you have connected SharpCap to your mount.
Cheers, Robin