ferrec (novato a la vista)
ferrec (novato a la vista)
Hola,
Es posible PA con un telescopio C8 y cámara ZWO ASI 183 MC añadiendo un reductor de focal 0,63X? o la placa es demasiado grande
Gracias.
Es posible PA con un telescopio C8 y cámara ZWO ASI 183 MC añadiendo un reductor de focal 0,63X? o la placa es demasiado grande
Gracias.
- admin
- Site Admin
- Posts: 13271
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: ferrec (novato a la vista)
Hi,
probably not
Putting the figures for the telescope, reducer and camera into a field of view calculator (https://astronomy.tools/calculators/field_of_view/) gives an FOV of 0.56 x 0.37 degrees. This is smaller than the recommended minimum (at least 0.5 degrees in each direction).
You can of course try - you don't even need a SharpCap Pro license to run the first stages of polar alignment which carry out the measurement and show what your polar align error is. The license is only needed for the final adjustment stage.
thanks,
Robin
probably not
Putting the figures for the telescope, reducer and camera into a field of view calculator (https://astronomy.tools/calculators/field_of_view/) gives an FOV of 0.56 x 0.37 degrees. This is smaller than the recommended minimum (at least 0.5 degrees in each direction).
You can of course try - you don't even need a SharpCap Pro license to run the first stages of polar alignment which carry out the measurement and show what your polar align error is. The license is only needed for the final adjustment stage.
thanks,
Robin
Re: ferrec (novato a la vista)
Ok,
Ya compre la licencia, me gusta mucho como funciona el programa.
Que material necesito para PA?
Gracias.
Saludos,
Ya compre la licencia, me gusta mucho como funciona el programa.
Que material necesito para PA?
Gracias.
Saludos,
Re: ferrec (novato a la vista)
Puedo hacerlo con mi buscador de 9x50 de celestron?
Gracias.
Saludos,
Gracias.
Saludos,
- admin
- Site Admin
- Posts: 13271
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: ferrec (novato a la vista)
Hi,
if you can connect a camera to it and get focus then it should work - a 50mm f/4 guider with a standard guide camera is a good choice for guiding and polar aligning.
Robin
if you can connect a camera to it and get focus then it should work - a 50mm f/4 guider with a standard guide camera is a good choice for guiding and polar aligning.
Robin
Re: ferrec (novato a la vista)
OK, probaremos.
Gracias Robin
Gracias Robin
Re: ferrec (novato a la vista)
Una nueva pregunta
Debo volverel telescopio a la posición inicial una vez realizada la PA?
Es decir volver delos 90º a los 0º?
Gracias y disculpa mi ignorancia.
Saludos desde Palma de Mallorca
Debo volverel telescopio a la posición inicial una vez realizada la PA?
Es decir volver delos 90º a los 0º?
Gracias y disculpa mi ignorancia.
Saludos desde Palma de Mallorca
- admin
- Site Admin
- Posts: 13271
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: ferrec (novato a la vista)
Hi,
yes, that's the usual procedure - your mount will expect to be in that home (zero degree) position when it is switched on. Having it rotated round to 90 degrees is likely to cause problems (unless you have a mount that has an RA encoder, or you moved the mount using the GOTO handset, in which case you don't have to return the mount to the home position).
Robin
yes, that's the usual procedure - your mount will expect to be in that home (zero degree) position when it is switched on. Having it rotated round to 90 degrees is likely to cause problems (unless you have a mount that has an RA encoder, or you moved the mount using the GOTO handset, in which case you don't have to return the mount to the home position).
Robin
Re: ferrec (novato a la vista)
oK. Probaremos esta noche, hay un buen seeing.
Gracias
Gracias
Re: ferrec (novato a la vista)
Hola Robin
Ayer intenté PA con buscador 9x50 de celestron, pero no conseguia tener foco y no aparecia ninguna estrella en la pantalla. No se si es compatible ese buscasdor con mi cámara ZWO ASI 183 mc.
Por otro lado hice pruebas con mi C8 y reductor 0,63x con cámara 183 MC, consegui resolver las 2 primeras placas y me daba un ajuste de más de 2º, pero fue imposible corregir absolutamente nada con AZ/ALT.
Como puedeo solucionarlo?
Gracias
Saludos,
Ayer intenté PA con buscador 9x50 de celestron, pero no conseguia tener foco y no aparecia ninguna estrella en la pantalla. No se si es compatible ese buscasdor con mi cámara ZWO ASI 183 mc.
Por otro lado hice pruebas con mi C8 y reductor 0,63x con cámara 183 MC, consegui resolver las 2 primeras placas y me daba un ajuste de más de 2º, pero fue imposible corregir absolutamente nada con AZ/ALT.
Como puedeo solucionarlo?
Gracias
Saludos,