guide cam not acquiring image
guide cam not acquiring image
I'm having trouble getting image from the guide cam when trying to polar align.....if I switch to PHD2, the guide cam is providing an image, so I feel it's not the cam. The thing is, I used it last night just fine....so something has gone wrong. Any help?
Thank you
Thank you
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: guide cam not acquiring image
Hi,
what make and model camera are you using? Can you provide a screenshot of the application with the guide cam open but no image showing (so we can see your settings etc)? Also the contents of the SharpCap log often helps diagnose issues.
thanks,
Robin
what make and model camera are you using? Can you provide a screenshot of the application with the guide cam open but no image showing (so we can see your settings etc)? Also the contents of the SharpCap log often helps diagnose issues.
thanks,
Robin
Re: guide cam not acquiring image
Its a Altair GPCam2 130M
Pretty new here so not sure where to find the logs....I never had a session last night with SharpCap because the cam was not providing any images, so would there even be one? Sorry no screen shot, I'll try again tonight. The cam has just always started taking the loops when I click the Polar Align in Tools.
Pretty new here so not sure where to find the logs....I never had a session last night with SharpCap because the cam was not providing any images, so would there even be one? Sorry no screen shot, I'll try again tonight. The cam has just always started taking the loops when I click the Polar Align in Tools.
Re: guide cam not acquiring image
Chuck
Log info here https://docs.sharpcap.co.uk/2.9/#Show%20Log
The logs can be found via Help > Show Log
Dave
Log info here https://docs.sharpcap.co.uk/2.9/#Show%20Log
The logs can be found via Help > Show Log
Dave
Re: guide cam not acquiring image
High thin clouds, not going to mess with it tonight...
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: guide cam not acquiring image
Hi,
the best way to test this sort of problem is to not wait for a clear night, but to test during daylight. If you have an eyepiece end cap of the clear or transulcent type then pop that over the end of the camera (to keep the dust off) and try using the software to get images. If the camera is working fine then you will see grey/white/orange images that will vary in brightness if you cover the camera with your hand or with exposure changes.
If you get no images then I suggest you work throught USB troubleshooting steps given here - viewtopic.php?f=18&t=349&p=1556#p1556 as often these will help identify the cause of a problem.
cheers,
Robin
the best way to test this sort of problem is to not wait for a clear night, but to test during daylight. If you have an eyepiece end cap of the clear or transulcent type then pop that over the end of the camera (to keep the dust off) and try using the software to get images. If the camera is working fine then you will see grey/white/orange images that will vary in brightness if you cover the camera with your hand or with exposure changes.
If you get no images then I suggest you work throught USB troubleshooting steps given here - viewtopic.php?f=18&t=349&p=1556#p1556 as often these will help identify the cause of a problem.
cheers,
Robin
Re: guide cam not acquiring image
I use the camera successfully in PHD2 when guiding.....so in my view, the camera is working fine. For some reason it is no longer acquiring images in SC.
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: guide cam not acquiring image
Hi Dave, it could be that problem - good spot. It would certainly be worth trying the suggestions in that link to confirm the suspicion or refute it.
Cheers
Robin
Cheers
Robin
Re: guide cam not acquiring image
I'm too new to interpret that link very well. The version I am currently using (the free one is 3.1.5143) was detecting the GPCam just fine the night before I discovered it was failing to detect it. I'm currently downloading 3.1.5193 and will give it a try.