live stacking won't start new image
live stacking won't start new image
I did a live stack of m57 and it turned out great, but when I went to m27 it show it on the screen until I hit live stacking again, and m57 shows back up on the screen but would not stack because I wasn't on m57. So what am I missing here? I tried several things, save, stop, clear. what do I need to do to end that image and start another? I use a ZWO 1600MC camera.
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: live stacking won't start new image
Hi,
the 'Clear' button should do what you need - clears the current stack, resets the image and sets the frame counts back to zero - see https://docs.sharpcap.co.uk/3.2/#The%20 ... 0Interface
cheers,
Robin
the 'Clear' button should do what you need - clears the current stack, resets the image and sets the frame counts back to zero - see https://docs.sharpcap.co.uk/3.2/#The%20 ... 0Interface
cheers,
Robin
Re: live stacking won't start new image
I thought i did hit the clear button, maybe not. I will check this out the next time i go out. I sent my 11" celestron back to california to be cleaned and checked out, so i dug out my 10" meade LXD55. It does not have the capability to autoguide. So i thought i would try the live stack mode and it worked great. I will let you know when i test it. we got full moon now.
Thanks
Thanks
Re: live stacking won't start new image
Yes the clear button did the trick. I thought i hit the clear button but i guess not.
Thanks,
Glen
Thanks,
Glen