2/3" lens on 1/2.3" camera?

Using SharpCap for any Non-Astro use including Microscopy, high speed imaging or anything else!
Post Reply
smile
Posts: 5
Joined: Sun Dec 03, 2017 3:29 pm

2/3" lens on 1/2.3" camera?

Post by smile » Sun Dec 03, 2017 3:41 pm

Hello, I have c mount lens the 2/3" MC3-03X macro Zero distortion multi-configuration macro lens.
Lens was not cheap at ~700Eur.
http://www.opto-engineering.com/product ... distortion

Now I would like to get the 18MP 1/2.3" camera.
https://en.ids-imaging.com/store/produc ... rev-2.html

Lens manufacturer sent me these charts for my lens, it seems the lens is more like 10MP at 180lp/mm sice FUJINON 12MP is 200lp/mm
14mp.jpg
14mp.jpg (38.84 KiB) Viewed 27 times
5mp.jpg
5mp.jpg (43.84 KiB) Viewed 27 times
The problem is that Pointgrey states that you need 323 lp/mm for 1/2.3" sensor ! No such lenses exit as far as I searched.

------------------

How bad will the image be on 1 vs. 2?
1.https://en.ids-imaging.com/store/produc ... rev-2.html
compared to say
2.https://www.baslerweb.com/en/products/c ... 4024-29uc/

I refuse to believe I can use 5MP cameras only, I need more resolution. And why there are no 2/3" sensors with resolutions like 18MP it they can easily squeeze them into 1/2.3"?????

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest