SharpCap Forums

Check your flats and darks to see if those hot pixels are in those images. I had a similar experience with this and new clean flats and darks was the solution. Sometimes it took multiple attempts to get clean flats and darks.

I have it working with Remote Desktop Connection. Make sure the "use all my monitors" is checked.

Adding the "disconnect from guiding application" to the sequence did the trick.

Thanks!

For what it's worth, I add the guiding steps to my live stacking sequence because I kept forgetting to start guiding.

Over the last few observing nights, I have noticed that dithering was not taking place. When I start live stacking from my sequence, PHD2 does starts guiding normally. However, under the guiding tab, guiding status shows not connected. I also have only stack when guiding is active selected. If I man...

With new update, 4.1.10700.0 everything is looking good! Problem solved. Thanks a bunch!
Tom

Here is a log from a quick test. I started SharpCap and loaded the test camera. The screen scaling was at 225% on both monitors. Selected CTRL-F12 and the image stayed on screen 1. Selected CTRL-F12 to go back to normal view. Changed the scaling to 200% on both monitors and repeated the same steps w...

Yes, the SharpCap window was fully maximized, but not in "Full Screen" (F11) mode.

Here is a log for testing.

Yep, it looks like a scale issue. Both monitors are the same, 3840x2160 resolution and I run them at a scale of 225%. At a scale of 175%, two monitor view works as it should. Guess I need to install younger eyes!

I have noticed an unexpected behavior with Two Monitor View and beta 4.1.10609.0. With SharpCap open on monitor 1, selection Two Monitor View displays the image on monitor 1 in full screen and nothing is displayed on monitor 2. With SharpCap open on monitor 2, selection Two Monitor View displays the...