SharpCap Forums

hi. need cross hairs that the cross over point is the center pixel of the CMOS or CCD chip !! you have cross hairs , double stack.. but they are not fixed to chip center x,y also need to beable to put a CIRCLE on the display X pixels from the center pixel of the above cross hairs at x,y. cross hairs...

HI.. very good.. but you missed the point. when do you bin? as the raw image cmos is read out to a full frame image? do you bin that first????? then apply dark flat bias??? or do you bin last? what isthe noise after you bin after you calibrate the image!!!! nosie should be slightly better as your no...

hi

it is not that easy

i hvae a script i am working on..email me joeastro at aol. com

i will send you a copy

the example inthe manual does what you ask.. just remove all the Draw. stuff.

that part did not work.. what is left is a loop. while loop

hi scritping PY something dont do write!@! SharpCap.SelectedCamera.Controls.Exposure.Value = 20 this is one of them.. on the gui buttons to the right of quick picks list is [] check box auto the auto will try and make your image brightness exposurelength long enough..so you can get an image. but whe...

hi open the master flat dark. the black leves or noisey white levels might be too low in the master.fits i have a problem with image frame size. the cmos chip is say 5000x3000 pixels bin 1x1 so if you take a dark then switch to 2x2 or other bin the dark will be rejected when you try to use it. is th...

hi every time i change the exposure time by the py script. the auto rechecks itself ON i can not find the command to turn off AUTO what ever it does.. it tries to detect the image brightness and adjust the exposure i guess. but i want it OFF so i can use my own PY script seconds of time. and every t...

hi can not get py script to turn on the cooler = 'on' any one solved that problem.. the zwo camera is cooled.. so it has a set temp, and shows current temp fine. but i can not get the script to TURN on the gui button for cooler always shows off.. when i run my script. #SharpCap.SelectedCamera.Cooler...

hi
on the list for image frame size

if you divide zwo cmos chip 5496x you 2748 and not 2744 as shown on the drop down menu for picture area

and you need to add other sizes for the zwo cmos chips..

for all the bin sizes, 2,3,4

thank
joe

hi

can not get py scritping to allow asking for INPUT() modes
please post how to ask for input in py scripting...

input() only version 3+
raw_input() version 2.x should work but give EOF error and does not stop and wait for input
stdin() does not work either

joe
wb6dco

hi why cant we reload an image.. sharpcap3.2 with pro license.. where is the image reload.. from the folder. you can check if the image is FITS and from a camera sharpcap3.2 has taken the image? but after you save an image and what to look at it again..after to take others there is no FILE> OPEN> an...