Search found 12982 matches

by admin
Thu Mar 28, 2024 2:05 pm
Forum: How do I?
Topic: How Do I (or can I?) change the default stacking time for Smart HIstogram
Replies: 2
Views: 21

Re: How Do I (or can I?) change the default stacking time for Smart HIstogram

Hi, yes, there's a 'Total stacking time' dropdown where you can choose a selection of lengths like 30min and 2hr and so on. However, that won't actually change the recommended exposure/gain settings - all it will do is alter the number of frames that are going to be captured and change the graph tha...
by admin
Thu Mar 28, 2024 2:01 pm
Forum: How do I?
Topic: Change exposure slider - Count down timer goes negative
Replies: 4
Views: 556

Re: Change exposure slider - Count down timer goes negative

Hi, Ok, thanks for the info. The negative count usually indicates that an expected frame from the camera is 'overdue', which can happen due to a variety of causes, but one thing that is definitely worth checking is the USB connection... If you are using any long cables/hubs/extensions, remove them a...
by admin
Thu Mar 28, 2024 1:52 pm
Forum: How do I?
Topic: Sharpcap mount control
Replies: 3
Views: 108

Re: Sharpcap mount control

Hi, if you want to use a cable then there are a couple of choices for ASCOM driver - EQMOD which is well tested and reliable but getting a little long in the tooth and Green Swamp Server which is a much newer option. I have used both with my EQ6 and had good results from them. Just one more thought ...
by admin
Thu Mar 28, 2024 1:49 pm
Forum: How do I?
Topic: Guiding during the eclipse
Replies: 1
Views: 28

Re: Guiding during the eclipse

Hi, the center of mass tracking will definitely try to center the bright crescent in view during the partial parts of the eclipse, which will push the sun off-center and probably isn't what you want. If you have surface detail visible (sunspots, etc) then the surface tracking will probably do a bett...
by admin
Wed Mar 27, 2024 2:46 pm
Forum: Bug Reports
Topic: Sequencer issue
Replies: 5
Views: 120

Re: Sequencer issue

Ok, I have tracked down the issue to a logic error in the sequencer code - when no camera is selected it was incorrectly waiting for the camera to restart after changing the selected device (should only do that if a camera is active). I have a fix that will be in next week's update. I think you coul...
by admin
Wed Mar 27, 2024 1:55 pm
Forum: How do I?
Topic: Slew to target after Polar Align
Replies: 5
Views: 72

Re: Slew to target after Polar Align

Hi, Geoff has pretty much covered the most likely causes - ie * Wrong latitude/longitude setup for the mount in the ASCOM driver * Wrong home position (should read Dec=+90 and HA=6 when in the home position of scope up, weights down, pointing north) * Also potentially - incorrect time Did you rememb...
by admin
Wed Mar 27, 2024 1:49 pm
Forum: Planetary Imaging
Topic: Image quality and ROI.
Replies: 4
Views: 122

Re: Image quality and ROI.

Hi, the FPS tends to matter most for targets that change relatively quickly (Jupiter rotation or solar prominences). For relatively slowly changing targets like the Moon or Saturn, you can always capture for longer to get enough frames, and reduce the exposure as far as required to freeze the seeing...
by admin
Wed Mar 27, 2024 1:46 pm
Forum: Bug Reports
Topic: Sequencer issue
Replies: 5
Views: 120

Re: Sequencer issue

Hi, it looks like it is timing out waiting for the change in selected switch to complete, which is odd since it should be a fairly simple operation (especially as you don't have a camera open). I will have to test a similar setup myself and see if I can reproduce the issue or not. Will get back to y...
by admin
Tue Mar 26, 2024 2:41 pm
Forum: Planetary Imaging
Topic: Image quality and ROI.
Replies: 4
Views: 122

Re: Image quality and ROI.

Hi, to make this clearer I'm going to add some specifics... Let's assume your camera is 4000x3000 pixels and you can see the whole of the moon in view at once when using your telescope. So, you capture an image of the moon. Next, you set the camera to only capture an area of 2000x1500 pixels. Now in...
by admin
Tue Mar 26, 2024 2:34 pm
Forum: How do I?
Topic: Sharpcap mount control
Replies: 3
Views: 108

Re: Sharpcap mount control

Hi, I must admit I have no experience with the WIFI connected Skywatcher mounts. I guess the first thing to try would be to see if you can get the Synscan Pro app on the PC to control the virtuoso mount at all via WIFI (using the movement direction buttons and so on). If you get that working then I ...