SharpCap Forums

Hi Robin
Thanks for the prompt reply
as soon as I have clear skies
I do all the necessary tests

Thank you very much
Tiziano

Hi Robin ------------------------- Hi, the easiest way is to set up the dithering options that you want in a manual live stack and then leave them set up. Live stacking will then do its thing when launched from the sequencer and that will include dithering as configured - nothing to do in the sequen...

Hi Robin a question about 'Sequencer editor' I wanted to use both Dithering and Live stack inside the script.... It is possible to use the 'GUIDING DITHER EVERY 10 FRAMES' or the 'GUIDING DITHER EVERY 10 FRAMES' with the 'LIVE STACK FOR 5 FRAMES SAVING AS FITSRawStack16Bit COUNTING Stacked FRAMES' i...

HI Robin Your help, how would you do the 'live stacking' setting for deep sky photos, using short exposures, having an altazimutale mount, (Nexstar 6se), in order not to use DSS I could make a 60 minute file (Save & reset every 60 Minutes total exposure) with a single frame exposure of 4/5 secon...

Hi Robin A question for you tell me if I'm wrong I use 'Live Stacking' to capture the deep sky -ON Align Frames -ON FMHM filter and -Advance ---> Save & reset every (1) Minutes total exposure In this way, many one minute files are created, after I process all these files created with Deep Sky St...

Hi Robin,

it is true that before asking for help you
should study and read well then ask
Thanks for your help,
we will hear from you when I will do some test

Tiziano

Hi Robin sorry if i disturb you so much I found this section on Sharpcap that might work for me under: Camera Control Panel '--->' Preprocessing '---> Apply flat, here insert the path where the previously created MasterFlat is located, then I start the 'Live Stacking', setting the frame alignment to...

Hi Robin I did some tests on the fly, and I saw that shooting with Sharpcap via 'Live Stacking' setting 1- Align Frames (NO Check) 2- Raw Frames (Save except when Paused / Dithering) In this way, all individual light files are saved then from Capture ---> Capture Flat, I capture the flat files then ...

I Robin,
Sorry but I didn't understand,
how can I do / apply flat files to light files
made by sharpcap through 'live staking'

Tiziano

Hi Robin The Light files I created via Sharpcap 'Live stacling' using these settings: -Color space: RAW16 -Capture area: 5544x3684 -Binning: 1x1 -Output format: FITS files -Debayer Preview: ON Also this morning I took a test I created LIGHT files (total 1 minute) using 'Live Stacking' using the sett...