Info: 08:22:04.8913356 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.1.5219.0 Info: 08:22:04.8923337 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 114Mb Info: 08:22:04.8963265 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 146Mb Info: 08:22:04.8963265 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 8079Mb Info: 08:22:04.8963265 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 6251Mb Info: 08:22:04.8963265 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0 Debug: 08:22:04.9946390 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started Info: 08:22:05.0255799 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator Info: 08:22:05.0255799 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator Info: 08:22:05.0260787 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator Info: 08:22:05.0260787 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator Warning: 08:22:05.0395544 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Could not load capture provider - SharpCap.Cameras.PointGrey.PointGreyDeviceEnumerator - System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'FlyCapture2Managed_v140.dll' or one of its dependencies. The specified module could not be found. at SharpCap.Cameras.PointGrey.PointGreyDeviceEnumerator..ctor() --- End of inner exception stack trace --- at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance[T]() at SharpCap.MultiCaptureProvider.AddProvider[T]() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Models\MultiCaptureProvider.cs:line 510 Info: 08:22:05.0395544 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator Info: 08:22:05.0445445 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Altair.dll Info: 08:22:05.0450438 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.ASCOMCamera.dll Info: 08:22:05.0460415 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.ASI.dll Info: 08:22:05.0460415 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Basler.dll Info: 08:22:05.0465404 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Celestron.dll Info: 08:22:05.0495358 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.DS3.dll Info: 08:22:05.0500346 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.Fake.dll Info: 08:22:05.0500346 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.INova.dll Info: 08:22:05.0525301 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.NewDirectShow.dll Info: 08:22:05.0530290 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.PointGrey.dll Info: 08:22:05.0535282 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.1\SharpCap.Cameras.QHY.dll Info: 08:22:05.0535282 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type CelestronDeviceEnumerator Info: 08:22:05.0540271 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type iNovaDeviceEnumerator Info: 08:22:05.0540271 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator Info: 08:22:05.0540271 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator Info: 08:22:05.0545259 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FakeDeviceEnumerator Warning: 08:22:05.0989417 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.WheelProxy.ASCOM.dll because : Could not load file or assembly 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' or one of its dependencies. The system cannot find the file specified. : Could not load file or assembly 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' or one of its dependencies. The system cannot find the file specified. Warning: 08:22:05.1179056 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type TargetInvocationException from Failed to loaded FocuserProxy assembly Sharpcap.FocuserProxy.ASCOM.dll because : Exception has been thrown by the target of an invocation. : Exception has been thrown by the target of an invocation. Stack Trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.Activator.CreateInstance(Type type) at SharpCap.FocuserFinder.LoadFocusers(Type t) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Utils\FocuserFinder.cs:line 116 at SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap\Utils\FocuserFinder.cs:line 99 Warning: 08:22:05.1199033 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : System.IO.FileNotFoundException: Could not load file or assembly 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' or one of its dependencies. The system cannot find the file specified. File name: 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' at Sharpcap.FocuserProxy.ASCOM.Factory..ctor() WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. Warning: 08:22:05.1293840 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.MountProxy.ASCOM.dll because : Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. : Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. Info: 08:22:05.4996785 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs) at System.EventHandler.Invoke(Object sender, EventArgs e) Debug: 08:22:05.5420977 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended Debug: 08:22:05.6369174 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started Debug: 08:22:05.6379155 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended Debug: 08:22:05.6608722 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started Debug: 08:22:05.6838293 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked Debug: 08:22:05.6933111 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started Info: 08:22:05.7072853 Thread:#14 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras Warning: 08:22:05.8036012 Thread:#8 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from fetching menu items from provider : ASCOM Cameras : Could not load file or assembly 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' or one of its dependencies. The system cannot find the file specified. Debug: 08:22:05.8045993 Thread:#8 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started Debug: 08:22:05.8045993 Thread:#8 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended Info: 08:22:05.8050986 Thread:#8 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras) Info: 08:22:05.8050986 Thread:#8 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras) Info: 08:22:05.8125841 Thread:#14 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Basler GenICam Source (DirectShow Cameras) Info: 08:22:05.8125841 Thread:#14 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Basler GenICam Source 2 (DirectShow Cameras) Info: 08:22:05.8125841 Thread:#14 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Basler GenICam Source 3 (DirectShow Cameras) Info: 08:22:05.8125841 Thread:#14 SharpCap.MultiCaptureProvider+d__20.MoveNext() :: Detected Camera: Basler GenICam Source 4 (DirectShow Cameras) Debug: 08:22:05.8135822 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended Info: 08:22:05.9094008 Thread:#9 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras Info: 08:22:05.9917430 Thread:LogInfo Thread#6 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz with 4 cores. Debug: 08:22:06.0491366 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup Debug: 08:22:06.0496369 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run Debug: 08:22:06.0506339 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated Debug: 08:22:08.6866836 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done Debug: 08:22:08.7360898 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended Error: 08:22:08.7365883 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Downloading license update list : The remote name could not be resolved: 'downloads.sharpcap.co.uk' Info: 08:22:51.3027294 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass35_0.b__0() :: Changing camera from none to Basler GenICam Source Info: 08:22:51.3356675 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread Debug: 08:22:51.3431538 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : Basler GenICam Source (via DirectShow Cameras) Info: 08:22:51.3481440 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started Debug: 08:22:51.3486432 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started Debug: 08:22:51.6419420 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Ended Info: 08:22:51.6614004 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Started Debug: 08:22:51.6623985 Thread:#1 SharpCap.Base.SimpleCaptureProvider.GetControls() :: Started Debug: 08:22:51.9056928 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetPinControls() :: Pin controls being added Debug: 08:22:51.9431167 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started Debug: 08:22:51.9570902 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended Info: 08:22:51.9585875 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: Camera controls being added via native IAMCameraControl Info: 08:22:51.9665701 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: IAMCameraControl interface not found - no camera controls will be available Info: 08:22:51.9670690 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: Proc Amp controls being added via native IAMVideoProcAmp Info: 08:22:51.9695710 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: IAMVideoProcAmp interface not found - no proc amp controls will be available Info: 08:22:52.0174722 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Ended Info: 08:22:52.0179711 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Ended Debug: 08:22:52.0184703 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Started Info: 08:22:52.0868482 Thread:#1 SharpCap.MultiCaptureProvider.StartPreview() :: Starting preview on Basler GenICam Source Info: 08:22:52.1053089 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Started Info: 08:22:52.1211121 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Starting Preview on Basler GenICam Source, 1280x960, Mono, 8bits Debug: 08:22:52.1310932 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Started Debug: 08:22:52.1340878 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Started Debug: 08:22:52.1390784 Thread:Grab Thread#11 SharpCap.Base.CameraProxyBase.GrabThreadProc() :: Started Info: 08:22:52.1650268 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory check based on total memory of 8079Mb, available of 6214Mb Info: 08:22:52.1650268 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory enabled at 1024Mb for Frame Cache and 1024Mb for LiveStack/Misc on 64 bit system. Info: 08:22:52.1655261 Thread:#1 SharpCap.Base.Memory.Allocator..cctor() :: Assigning 1024Mb to non-pool memory and 1024Mb to the frame pool. Info: 08:22:52.1715143 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Started Warning: 08:22:54.3443854 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80040217 Warning: 08:22:54.3443854 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failed to render MediaType.Video, retrying without specifying media type. Warning: 08:22:54.3448868 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80004005 Warning: 08:22:54.3448868 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Still failing to render with no media type, falling back on manual graph building Error: 08:22:54.4112968 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type COMException from Rendering preview graph in mode 1024x768 Y800 at 55 fps : No combination of intermediate filters could be found to make the connection. Stack Trace: at DirectShowLib.DsError.ThrowExceptionForHR(Int32 hr) at SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.NewDirectShow\CaptureGraphBuilder.cs:line 129 at SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.DS3\DS3CameraProxy.cs:line 304 Warning: 08:22:54.4167861 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Warning: 08:22:54.4172850 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Debug: 08:22:54.4172850 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Debug: 08:22:54.4797469 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Info: 08:22:54.4837367 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: Retrying preview graph render in mode 1280x960 Y800 at 55 fps Warning: 08:22:56.5525079 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80040217 Warning: 08:22:56.5530071 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failed to render MediaType.Video, retrying without specifying media type. Warning: 08:22:56.5530071 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80004005 Warning: 08:22:56.5530071 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Still failing to render with no media type, falling back on manual graph building Error: 08:22:56.5898647 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type COMException from Re-rendering preview graph in mode 1024x768 Y800 at 55 fps : No combination of intermediate filters could be found to make the connection. Stack Trace: at DirectShowLib.DsError.ThrowExceptionForHR(Int32 hr) at SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.NewDirectShow\CaptureGraphBuilder.cs:line 129 at SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.DS3\DS3CameraProxy.cs:line 321 Warning: 08:22:56.5898647 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Warning: 08:22:56.5903632 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Debug: 08:22:56.5903632 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Debug: 08:22:56.6163139 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Info: 08:22:56.6163139 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: Retrying preview graph render in mode 1280x960 Y800 at 55 fps Warning: 08:22:58.7175207 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80040217 Warning: 08:22:58.7175207 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failed to render MediaType.Video, retrying without specifying media type. Warning: 08:22:58.7175207 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Failure HR from COM method : 0x80004005 Warning: 08:22:58.7175207 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) :: Still failing to render with no media type, falling back on manual graph building Error: 08:22:58.7467512 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception of type COMException from Re-rendering preview graph in mode 1024x768 Y800 at 55 fps : No combination of intermediate filters could be found to make the connection. Stack Trace: at DirectShowLib.DsError.ThrowExceptionForHR(Int32 hr) at SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RenderStream(Guid pinCategory, IBaseFilter intermediate, IBaseFilter target, String intermediateFilterName) in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.NewDirectShow\CaptureGraphBuilder.cs:line 129 at SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() in C:\Documents\Source Code\SharpCap3.1\src\SharpCap.Cameras.DS3\DS3CameraProxy.cs:line 321 Warning: 08:22:58.7472493 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Warning: 08:22:58.7472493 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Failure HR from COM method : 0x80040209 when determining pin connection Debug: 08:22:58.7472493 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Debug: 08:22:58.8284918 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureGraphBuilder.RemoveDownstream(IBaseFilter filter) :: Ended Info: 08:22:58.8289907 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: Retrying preview graph render in mode 1024x768 Y800 at 68.3 fps Debug: 08:23:00.9121165 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: capture graph rendered to frame filter and preview sink Info: 08:23:00.9912536 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Ended Debug: 08:23:01.0451508 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Ended Debug: 08:23:01.0456500 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Ended Info: 08:23:01.0491428 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartPreview Debug: 08:23:01.0526364 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Started Debug: 08:23:01.0576273 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started Debug: 08:23:01.0581254 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended Debug: 08:23:01.0850749 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Ended Info: 08:23:01.1494527 Thread:#1 SharpCap.Models.Transforms.set_SelectedTransform(Transform value) :: Selecting transform None Info: 08:23:01.1534447 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartPreview event received in UI thread Info: 08:23:01.1544425 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available Info: 08:23:01.1559402 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Ended Debug: 08:23:01.1639253 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Ended (Profile applied)